Data Collection 1 - Konica Minolta 7020 Service Manual

HOME
3. Setting of PM cycle
Set PM Cycle as follows:
Step
1 Enter the 25 mode.
2 [25 mode menu screen]
Press the [2. PM COUNT/CYCLE] key.
3 [PM Count/Cycle menu screen]
Press the [2. PM CYCLE Set] key.
4 [PM Cycle set screen]
Enter PM cycle from the numeric keys.
Enter upper 3-digit (hundred thousand, ten
thousand, thousand) only.
5 Press the [SET] key to enter a PM cycle that has
been entered.
6 Press the [RETURN] key to return to the PM
count/cycle menu screen.
Operation procedure
[4] Data Collection
This function enables viewing of the various data
recorded in the machine.
Also, it is possible for the collected data to be checked by
KRDS and management listing.
Data collection menu
1. Count data collection
2. Area data collection start (Date count data)
Data collection list
Classification Contents
Data collection Count number of
1 copies by each size
Count RADF original
feed quantities
Data collection Count of JAM
2 occurrence by each
point
Data collection Count of copies by
3 each mode
Data collection Count of SC
4 occurrence
Note 1: Only data collection 1 can be checked in
default.
Note 2 : For the setting method, see "[2] Setting
software DIP SW" in 25 mode.
4-21
25
ADJUSTMENT
Pre-peration
– (Note 1)
• Enter the 25 mode
↓
• Select [1. Software
SW]
↓
• Set the address to
8-7:1 (Note 2)