Konica Minolta 7020 Service Manual page 188

HOME
ADJUSTMENT 25
(3) Parts No. setting
Enter the new parts No. (9-digit) from the numeric
1
keys and alphabet keys on the screen.
Step Operation procedure
1 Enter the 25 mode.
2 [25 mode menu screen]
Press the [4. Parts counter ] key.
3 [Parts counter menu screen]
Press the [2. Count of parts (Named)] key.
4 [Copy count screen by parts to be replaced (named)]
Press the [
or changed.
5 Press the [P/N SET] key.
6 [Part No. setting screen by parts to be replaced (named)]
Enter new parts No. using the numeric and
alphabet keys.
7 Press the [SET] key to enter the parts No. that
has been entered.
8 Press the [RETURN] key to return to the copy
count screen by parts to be replaced (Named).
Note: When pressing the [RETURN] key without
pressing the [SET] key, the setting is
complete without changing a new parts
No. and returns to the copy count screen
by parts to be replaced (Named).
] or [ ] to select the data to be set
(4) Parts name setting
Enter the new parts name from the keys on the
screen.
There are three screen in the input screen and are
changed with the [
• Alphabet (a capital letter), numeric number
• Alphabet (a small letter), numeric number
• Symbol, numeric number
Step Operation procedure
1 Enter the 25 mode.
2 [25 mode menu screen]
Press the [4. Parts counter ] key.
3 [Parts counter menu screen]
Press the [2. Count of parts (Named)] key.
4 [Copy count screen by parts to be replaced (named)]
Press the [ ] or [
set or changed.
5 Press the [P/N SET] key.
6 [Parts name setting screen by parts to be
replaced (named)]
Enter new parts name using the keys on the screen.
7 Press the [OK] key to enter the parts name that has
been entered and return to the copy count screen
by parts to be replaced (Named).
Note: When pressing the [CANCEL] key without
pressing the [OK] key, the setting is
completed without setting a parts name
and returns to the copy count screen by
parts to be replaced (Named).
4-30
] or [ ] key:
] to select the data to be