HOME
[6]
Removing the Ribbon Cable
(7135 Only)
a. Procedure
(1) Move the lock lever forward to release the lock,
then pull out the ribbon cable.
Ribbon cable
Lock lever
[7]
Reinstalling the Ribbon Cable
(7135 Only)
a. Procedure
(1) Move the lock lever forward, then insert the ribbon
cable firmly into the connector while ensuring that
the conductive face of the ribbon cable is
positioned on the opposite side of the lock lever.
Ribbon cable
Lock lever
(2) Push back the lock lever to lock the ribbon cable.
Ribbon cable
Lock lever
3-B-5
DRIVE SECTION
Conductive face (back side)