Test Pattern Output - Konica Minolta 7020 Service Manual

HOME
ADJUSTMENT 36
Step Operation procedure
1 Enter the 36 mode.
2 [36 mode menu screen]
Press the [3. Running mode] key.
3 [Running test mode menu screen]
Press the key according to the desired running
mode. (Mode 1 to Mode 5)
4 [Basic screen]
Press the Start print button.
5 After checking the copy operation, press the
Stop/Clear button to stop copy operation.
6 Press the # button while pressing the
return to the running mode menu screen.
7 To perform another running test mode, repeat
steps 3 to 6.
8 Press the [RETURN] key to return to 36 mode
menu screen.
[5]

Test Pattern Output

Perform an output check of the various internal patterns.
1
Select the [4. Test pattern] in the 36 mode menu
screen, then the test pattern output screen will
appear.
Note:
1
No.1
No.2
No.49
No.11
button to
*
No.16
Step
1 Enter the 36 mode.
2 [36 mode menu screen]
Press the [4. Test pattern] key.
3 [Test pattern output screen]
Enter a pattern number to be output from
numeric key.
4 Press the [SET] key.
Press the [COPY] key.
5 [Basic screen]
Press the Start print button to output a test
pattern.
6 Press the # button while pressing the
return to the test pattern output screen.
7 To output a different test pattern, repeat steps
3 to 6.
8 Press the [RETURN] key to return to the 36 mode
menu screen.
4-52
Do not output patterns that are not particularly
specified.
Overall halftone
Gray scale pattern
Writing system check
Linearity evaluation pattern
Operation procedure
button to
*