List Of Jam Codes - Konica Minolta 7020 Service Manual

HOME

LIST OF JAM CODES

During operation
Classification
By-pass
Upper tray
Lower tray
DB tray
Conveyance
Fixing/exit
3
7020/25/30/
35 only
3
7020/25/30/
35 only
ADU
conveyance
J72-16
FS-107
J72-17
J72-19
Causes
Code
J10 PS1 (registration) failed to turn ON within a
predetermined time after start of by-pass feed
(after SD3 (by-pass) ON).
J11 PS1 (registration) failed to turn ON within a
predetermined time after start of upper-tray
feed (after SD1 (first paper-feed (upper)) ON).
J12 PS1 (registration) failed to turn ON within a
predetermined time after start of upper-tray
feed (after SD2 (first paper-feed (lower)) ON).
J13 PS104 (jam detect 1) failed to turn ON within a
predetermined time after start of feed from DB
upper tray (after SD101 (first paper-feed
(upper)) ON).
J14 PS104 (jam detect 1) failed to turn ON within a
predetermined time after start of feed from DB
lower tray.
J16 PS1 (registration) failed to turn ON within a
predetermined time after paper passed PS104
(jam detect 1).
• DB upper tray feed
• DB lower tray feed
J30 PS1 (registration) failed to turn OFF within a
predetermined time after MC1 (registration) ON.
J31 PS2 (fixing exit) failed to turn OFF within a
predetermined time after MC1 (registration) ON.
J32 PS3 (paper exit) failed to turn ON within a
predetermined time after PS2 (fixing exit) ON.
(At the single side copy mode)
J32-2 PS2 (fixing exit) failed to turn OFF within a
predetermined time after turning ON.
J33 PS3 (paper exit) failed to turn OFF within a
predetermined time after turning ON.
J92 PS1 (registration) failed to turn ON within a
predetermined time after start of ADU reversal.
J97-1 PS4 (ADU) failed to turn ON within a
predetermined time after PS2 (fixing exit) ON.
J97-2 PS4 (ADU) failed to turn OFF within a
predetermined time after turning ON.
PS702 (paper entrance detect) failed to turn ON within
a predetermined time after PS3 (paper exit) ON.
PS702 (paper entrance detect) failed to turn ON within a
predetermined time after PS707 (no paper detect) ON.
(Straight, sort/group mode for other than small size)
PS702 (paper entrance detect) failed to turn OFF
within a predetermined time after turning ON.
(Staple, sort/group, and small size straight modes)
Resulting
operation
If copying is in
progress at time
of jam, the
copier
completes
ejection and
then stops.
The main body
stops
immediately.
The FS-107 and
main body stop
immediately.
8-27
LIST OF JAM CODES
Correction
Take out the paper from the
bypass tray, and remove
any jammed paper.
Open the ADU door,
remove any jammed paper,
and close the door.
Pull out the tray, and
remove any jammed paper.
Open the DB conveyance
door, remove any jammed
paper, and close the door.
Pull out the tray, and
remove any jammed paper.
Open the ADU door and/or
DB conveyance door,
remove any jammed paper,
and close the door.
Open the ADU door,
remove any jammed paper,
and close the door.
Open the finisher front door,
and conveyance cover
remove any jammed paper,
and close the door.