Konica Minolta 7020 Service Manual page 135

HOME
(7) Rotate the agitator input gear 1 counterclockwise
so that the developer moves into the inside of the
developing unit.
(8) Repeat steps (6) and (7) as necessary to load all of
the developer.
(9) Rotate the developing input gear counterclockwise
and check the bristle height along the entire
surface of the developing sleeve.
(10) Reinstall the developing cover, and fasten it in
place with the 2 set screws. Be careful to keep the
cover clear of the scatter prevention sheet.
2
Scatter prevention sheet
Developing input gear 1
3-G-3
DEVELOPING UNIT