HOME
ADJUSTMENT
[9]
Displaying the ROM Version
Display ROM version mounted to the machine.
1.
ROM version viewing method
In the 25 mode menu screen, select [8. ROM
version], then the ROM version display screen will
appear.
The item name and ROM version are displayed on
the ROM version display screen. Each serial number
is displayed at the right side of each item.
When there is no option not installed, the applicable
position is a blank.
ROM version display
1. System control
2. Image control
3. Panel control
4. Optical control
5. RADF
6. Finisher
When the optional fax and printer are installed, their
ROM versions will also be displayed.
Press the [RETURN] key to end this screen and
return to the 25 mode screen.
[10] KRDS Setting
Refer to the chapter "KRDS."
[11] ISW Setting
Refer to the chapter "ISW."
[12] Root Counter Display
The root counter (total counter can be checked in 25
mode on the root counter display.
Step
Operation procedure
1
Enter the 25 mode.
2
[25 mode menu screen]
Press the [11. Root counter].
3
[Root counter display screen]
Values of the root counter (total counter) are
displayed.
4
Press the [RETURN] key to return to the
25 mode screen.
[13] Setting Date
Set the total count start day.
Step
Operation procedure
1
Enter the 25 mode.
2
[25 mode menu screen]
Press the [12.Setting date] key.
3
[Setting date screen]
Using the numeric keys, enter the year, month
and day in that sequence
4
Press the [OK] key to return to the 25 mode screen.
Note:
Ends when the [Cancel] key is pressed
without amending the entered date, and
returns to the 25 mode menu screen.
[14] Counter Clear
3
(Other than 7020/25/30/35)
The counter must be cleared whenever the drum or fixing
parts/unit is replaced.
Select the [13. Counter Clear] from the 25 mode menu
screen to display the counter clear screen.
Following menu options are available from this screen.
1. Drum unit related counter (Drum counter).
2. Fixing counter (fixing web counter).
Step
Operation procedure
1
Enter the 36 mode.
2
[36 mode menu screen]
Press the [13. Counter clear] key.
3
[Counter clear screen]
Press the key corresponding to the item to be
cleared.
4
Message in the message display area will
confirm if you really want to clear the item.
Press the [YES] key. When the item is cleared,
the counter clear screen will be restored.
5
When clearing another counter, repeat above
steps 3 and 4.
6
Press the [RETURN] key to return to the 36
mode menu screen.
The operation here is the same as [13, Counter clear] of
the 36 mode menu screen.
4-34