HOME
DRIVE SECTION
[4]
Removing the Ribbon Cable
4
(Other than 7135)
2
a. Procedure
(1) Move the lock levers forward to release the lock,
then pull out the ribbon cable.
[5]
Reinstalling the Ribbon Cable
4
a. Procedure
(1) Move the lock levers forward, then, while ensuring
Lock levers
(2) Firmly push both lock levers, and lock the ribbon
3-B-4
(Other than 7135)
that the direction of the conductive face of the
ribbon cable is correct, push the connector firmly to
the rear.
Conductive face
cable.
Caution: Be sure to push both lock levers
together.
Lock levers