HOME
[9]
Counter Clear
The counter must be cleared whenever the drum or fixing
parts/unit is replaced.
Select the [8. Counter Clear] from the 36 mode menu
screen to display the counter clear screen.
Following menu options are available from this screen.
1. Drum unit related counter (Drum counter).
Note:
2. Fixing counter (fixing web counter).
Step
1
Enter the 36 mode.
2
[36 mode menu screen]
Press the [13. Counter clear] key.
3
[Counter clear screen]
Press the key corresponding to the item to be
cleared.
4
Message in the message display area will
confirm if you really want to clear the item.
Press the [YES] key. When the item is cleared,
the counter clear screen will be restored.
5
When clearing another counter, repeat above
steps 3 and 4.
6
Press the [RETURN] key to return to the 36
mode menu screen.
The operation here is the same as [13. Counter clear] on
3
the 25 mode menu screen. (Other than 7020/25/30/35)
Reset the drum counter after the charge grid
data to the standard values (factory default
data).
Operation procedure
4-59
36
ADJUSTMENT