Pm Count Setting - Konica Minolta 7020 Service Manual

HOME
25
ADJUSTMENT
[3]

PM Count Setting

2
This function resets the PM count and sets the PM cycle.
Care should be taken to reset the PM count properly.
PM count / cycle menu
1. PM count resetting
2. PM cycle setting
1. PM count reset
Select whether to reset the count in the PM count
reset screen.
Step Operation procedure
1 Enter the 25 Mode.
2 [25 mode menu screen]
Press the [2. PM COUNT/CYCLE] key.
3 [PM Count/Cycle Menu Screen]
Press the [1. PM count reset] key.
4 [PM Count Reset Screen]
Press the [YES] key to reset the PM count.
Press the [NO] or [RETURN] key, then the PM
count is not reset and returns to the PM count/
cycle menu screen.
2. Entering PM count start date
When resetting the PM count, it is necessary to input the
start date, and the screen below will appear automatically.
Step Operation procedure
1 [PM Count Starting Date Input Screen]
Enter a PM count start date from the numeric
keys.
2 Press the [SET] key to enter the data that has
been entered.
3 Press the [RETURN] key to return to the PM
count/cycle menu screen.
Note: When pressing the [RETURN] key without
pressing the [SET] key, the PM count start
date is not changed. It is necessary to
reset the count again for inputting the
count.
4-20