Check Of Count Value With P Function; How To Use P Function - Konica Minolta 7020 Service Manual

HOME
ADJUSTMENT P

CHECK OF COUNT VALUE WITH P FUNCTION

The P function enables to display of the following
parameters by using the
Total count
Total count start date (Note 1)
PM count/PM count limit (Note 2)
PM count start date (Note 2)
Fax send paper count (Note 3)
Fax receive paper count (Note 3)
1
Printer count (Note 3)
Scanner count (Note 3)
Drum count (Note 2)
Developing count (Note 2)
Fixing unit count (Note 2)
Note 1: Displayed only when address 22-4 of "1.
Software switch setting" in the 25 mode is
set to '1'.
1
Note 2: Displayed when the ! button on the P mode
screen is pressed.
Note 3: Displayed when an option is installed.
* button:
[1]

How to Use P Function

1
1. Turn on the SW1 (main power) and SW2(sub
power) to display the basic screen.
2. Press the * button.
3. The P mode screen appears, and the total count
value appears.
When an option is installed, the counter values for
the FAX, printer and scanner also appear.
The counter that appears differs depending upon
the installed option.
4. If you press the ! button on the P mode screen,
service-related counters that indicate the PM
count, and so on, appear.
5. To output the count value list, press the [PRINT]
key.
6. Press the [OK] key or the stop/clear button to return
to the basic screen.
4-4