25 Mode - Konica Minolta 7020 Service Manual

HOME

25 MODE

<List of adjustment items for 25 mode>
1. Software SW
2. PM COUNT/CYCLE
3. Collecting data
4. Parts counter
5. Password setting
6. Service TEL No.
7. Serial number
8. ROM version
9. KRDS setting
10. ISW
11. Root counter
12. Setting date
13. Counter clear (Note)
3
(Other then 7020/25/30/35)
Note: "13. Counter clear mode" is the same as "8. Counter clear" of the 36 mode.
3
Adjustment item menu
1. PM COUNT reset
2. PM CYCLE set
1. Count data Data Collection 1
(by each size)
(RADF paper passage count)
Data Collection 2
(JAM occurrence count by each point)
Data Collection 3
(copy count by each mode)
Data Collection 4
(SC occurrence count : F code)
2. Date count data
1. Count of parts (Fixed)
2. Count of parts (Named)
1. Key operator password set
2. E.K.C. master key code set
3. Weekly timer master key set
1. Calling time set
2. Host password set
3. KRDS TEL No. Setting
4. KRDS software SW set
5. KRDS Setup calling
1. Drum unit related counter
2. Fixing unit related counter
Refer to "List of software DIP SW".
41 items (7020/25/30 is the 39th item)
30 items
4 digits
8 digits
4 digits
Telephone & Fax. No. of service
center setting.
Sets up the serial number display of the main
body and each option, and the FAX destination.
Indicates the version of the ROM used for
overall control, image control, the operation
panel control, optics control, the RADF, the
finisher, FAX control, and printer.
Rewrites the contents of the flash ROM of
each board including boards used in options
except for a printer.
Displays the root counter (total
counter).
Sets the starting date of the total counter.
Clears the drum counter and the drum
drive counter
Clear fixing web counter
4-5
25 ADJUSTMENT
Remarks