Date/Time Setting; Install Date; Serial Number Input - Konica Minolta bizhub C352 Installation Manual

XIV. Date/Time Setting
1. Make sure that the Service Mode screen is dis-
played.
2. Display the Date & Time Setting screen.
(To display the Date & Time Setting screen, press
Stop → 1 → 1 → 4 → 4 → Clear on the Control
Panel.)
3. Press the clear key.
4. Enter the data for the year, month, day, and time-
of-day from the 10-key pad.
5. Touch "Entry."
Note:
Touching the Entry key returns the figures in the
Date & Time Setting screen to 0 and Date & Time
Setting has been completed.
6. Touch "END."
7. Touch "Exit" on the Service Mode Screen.
8. Select the Date/Time Setting function as follows:
Utility/Counter → Administrator Setting → Enter
the Administrator Password (Default Setting:
12345678) → System Setting → Date/Time Set-
ting.
9. Select the item you want to set and press the
clear key.
10. Enter the data for the year, month, day, and
time-of-day from the 10-key pad.
11. Touch "OK."
12. Touch "Exit."
XV. Install Date
1. Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
2. Select the Install Date function as follows:
System 1 → Install Date.
4037IXE566DA
3. Press the clear key.
4. Enter the data for the year, month, and day from
the 10-key pad.
5. Touch "Entry."
Note:
Touching the Entry key returns the figures in the
Install Date screen to 0 and Install Date has been
completed.
6. Touch "END."
XVI. Serial Number Input
4037IXE536DA
1. Select the Serial Number Input function as fol-
lows: System 1 → Serial Number.
2. Making sure that "Printer" is selected on the
screen, enter the serial number of the printer from
the 10-key pad.
3. Following the same procedure, enter the serial
numbers of all other units.
Note:
"Scanner" and "Duplex" do not need to be input.
4. Touch "END."
E-11
4037IXE567DA
4037IXE568DA