10. SERVICE MODE
10.14 Count Mode
10.14.1
Display method of the Count Mode
1. Call the Service Mode to the display.
2. Press the following keys in this order.; Stop
3. Count Mode display will appear.
10.14.2
Count Mode
A. Use
• To set the counting method for the total counter and size counter.
• Use to change the counting method for the counters.
B. Procedure
• The default setting is depend on the marketing area.
Mode 1 : 1 count per 1 copy cycle (Default: Japan)
Mode 2 : Large size is double counts (Default: US, Europe, Asian pacific)
10.14.3
Large Paper size Mode
A. Use
• To set the size regarded as the large size (2 counts.)
B. Procedure
• The default setting is depend on the marketing area.
Large Paper size Mode 0 : Not counted - Never regard any size as the large size
Large Paper size Mode 1 : Regard A3/11 x 17 or more size as the large size.
Large Paper size Mode 2 : Regard 8
Large Paper size Mode 3 : Regard Foolscap or more size as the large size. When it
10.15 Clear Admin Password
A. Use
• To initialize the administrator password (Default value: 12345678).
• Use this function when the administrator forget the administrator password.
NOTE
• If the administrator password is initialized, after the initialization, immediately ask
the administrator for a new administrator password and change the default value
to the new password.
B. Procedure
1. Call the Service Mode to the display.
2. Touch [Clear Admin Password].
3. Touch [OK] on the confirmation screen to initialize the administrator password.
172
2
(Default: Japan)
In this machine, it is virtually no different than [Large Paper
size Mode 0]. (Default: US)
/
x 14 or more size as the large size. When it
1
2
exceeds 215.9 mm in the main scan direction and 355.6
mm in the sub scan direction (exceeds 337.8 mm at fax
scan) (Default: Europe, Asian pacific)
exceeds 203 mm in the main scan direction and 330 mm in
the sub scan direction (exceeds 313.5 mm at fax scan)
Field Service Ver. 1.1 Jun. 2010
2
2
0
0