Program 80 - Function Key Descriptor - Sam4s ER-420 Series Operation And Program Manual

Program 80 - Function Key Descriptor

Program descriptors by typing descriptors on the alpha keyboard overlay or by entering three
digit alpha character codes. To descript by three digit alpha character codes you must select
'No' in system option #25(See "System Option Programming).
102 • Program Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 8 0, press the SBTL key.
8 0 SBTL
3. If you are programming alpha overlay
Type up to 18
descriptor keys
or,
Enter up to 18
three-character
codes
4. To program additional function keys, repeat from step 3, or press the CASH
key to finalise the program.
CASH
FUNCTION
X/TIME
KEY
FUNCTION
KEY
ER420 Series