Program 250 - Plu Stock Amount Programming - Sam4s ER-900 Series Operation And Program Manual

Program 250 - PLU Stock Amount Programming

With this program, you can add stock to the PLU sales counters for PLUs you have designated as
stock keeping PLUs. See "Program 100 - PLU Status Programming". The stock number set here
can be the amount of stock that is being added to the current level, or optionally, it can be the new
total stock level. See option #18 in "Program Mode Programming – System Option
Programming" to set this option.
Programming PLU/PLUs Stock Amount
1. Turn the control lock to the PGM position.
2. To begin the program, enter 2 5 0, press the SUBTL key.
3. Select the PLU or PLUs you wish to program in one of the following ways:
•
•
•
•
•
4. Enter the stock amount you wish to add (up to six digits. Please do not use decimal
point. When 1 0 0 is entered, is equals to 1 item), press the X/TIME key.
5. To program additional PLU Stock Amount, repeat from step 3, or press the CASH key
to finalise the program.
CASH
SAM4S ER-900 Series Electronic Cash Register AU
2 5 0 SUBTL
Press a PLU on the keyboard, or
PLU
Press the first PLU in a range of PLUs that are to receive the same setting then press
the last PLU, or
PLU PLU
Enter up to 15 digit number of the PLU and press the PLU key, or
Enter the PLU#,
up to 15 digits
Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last PLU number in the range; press the PLU
key, or
Enter the first PLU#,
up to 15 digits
For a barcode item, scan the barcode. (Only for single item.)
Stock Amount
PLU
Enter the last PLU#,
PLU
up to 15 digits
X/TIME
PLU
Program Mode Programming • 133