Function Key Assignment Programming - Sam4s ER-390 Series Operation And Program Manual

When you want to enter PC Online mode, all you have to do is to set 232 Communication Option in
Programming.
When PC sends commands to ECR, The ECR will be automatically Online Mode if connected

Function Key Assignment Programming

Function keys may be relocated, inactivated or changed with this program. For example, you
may wish to place functions, such as PREVIOUS BALANCE and SERVICE that are not
placed on the default keyboard. Or perhaps, you may wish to remove a function, such as
CANCEL, for security reasons.
Please note the following limitations:
To Assign a Function Key to a Location:
•
88 Service Mode Programming
•
If you assign a duplicate of a function code, the duplicate will function exactly as
the original - you will not get separate totals and counters on reports for the
duplicated key.
•
You can reassign keys only in locations that are programmable. See
"Keyboards", where the key locations that may be programmed are identified.
1. Turn the control lock to the S position.
2. Enter 70, and then press the SBTL key.
7 0
3. Refer to Function Key Codes to find the code for the key you wish to assign,
press the location you wish to program. Repeat this step to assign another key.
Key Code
4. Press CASH key to finalize key assignment program.
CASH
SBTL
Key
Location
ER-390 Series