Running A Self Test - GRAPHTEC CE2000-60 User Manual

9.2 Running a SELF TEST

The SELF TEST function prints out a test pattern for checking the precision of the operation of the
cutting plotter itself (but not the status of its connection to a computer).
1
Step
Mount a plotting pen (not a cutter pen) at the cutting plotter's pen holder and then set the pen type,
FORCE, SPEED, and QUALITY to suit the pen mounted.
2
Step
Load paper of at least A3 size in the cutting plotter.
3
Step
PAUSE
Press the key to enter the PAUSE mode.
4
Step
Press the key until the menu below ap-
NEXT PAGE
pears.
INTERFACE
PEN UP/DOWN
7
Step
Press the key (TEST) to display the menu below.
F1/ORIGIN
CONDITION
SELF TEST
8
Step
Press the F2/TEST key (SELF TEST) to display the menu below.
YES
NO
To initiate printing of the self test pattern, press the
To return to the menu in Step 7, press the
CAUTION : The pen carriage begins moving as soon as the
YES in Step 8, so be sure to keep your hands and other objects away from the
cutting plotter's moving parts.
TEST
PATTERN
5
Step
Simultaneously press the
display the menu below.
PEN UP SPEED
OFFSET FORCE
6
Step
Press the
NEXT PAGE
pears.
TEST
LENGTH UNIT
key (YES).
F1/ORIGIN
key (NO).
F2/TEST
F1/ORIGIN
9 – 4
ENTER
and
NEXT PAGE
key until the menu below ap-
key is pressed to select
keys to