Printing A List Of The Currently Selected Conditions - GRAPHTEC CE2000-60 User Manual

9.1 Printing a List of the Currently Selected Conditions

Use this function to print out a list of the cutting plotter's currently selected conditions. A sample printout
is shown on the next page.
1
Step
Mount a plotting pen (not a cutter pen) at the cutting plotter's pen holder and then set the pen type,
FORCE, SPEED, and QUALITY to suit the pen mounted.
2
Step
Load paper of at least A4 size in the cutting plotter.
3
Step
PAUSE
Press the key to enter the PAUSE mode.
4
Step
Press the key until the menu below appears.
NEXT PAGE
INTERFACE
PEN UP/DOWN
5
Step
Simultaneously press the
PEN UP SPEED
OFFSET FORCE
6
Step
Press the key until the menu below appears.
NEXT PAGE
TEST
LENGTH UNIT
7
Step
Press the key (TEST) to display the menu below.
F1/ORIGIN
CONDITION
SELF TEST
Press the key (CONDITION) to initiate printing of a list of the cutting plotter's currently selected
F1/ORIGIN
conditions.
CAUTION : The pen carriage begins moving as soon as the
CONDITION in Step 7, so be sure to keep your hands and other objects away from
the cutting plotter's moving parts.
ENTER
and keys to display the menu below.
NEXT PAGE
9 – 2
key is pressed to select
F1/ORIGIN