Overview; Standard Accessories - GRAPHTEC CE2000-60 User Manual

1.1 Overview

The CE2000-60/120 is a cutting plotter that was developed for the specific purpose of cutting color
adhesive-backed film.
It is equipped with various functions that aim at improving the cutting quality. To ensure good cutting
quality and optimum productivity, be sure to read this User's Manual thoroughly before use.

1.2 Standard Accessories

After unpacking the cutting plotter, check that the standard accessories listed below are all present.
If an accessory is missing, please promptly contact your sales representative or nearest Graphtec vendor.
Power cord: 1
Cutter pen plunger: 1
Media cutter: 1
Stand : 1 (CE2000-120 only, packed in a separate box).
Stopper : 2 (CE2000-120 only, packed together with main unit).
Stock roller : 2 (CE2000-120 only, packed together with main unit).
CE2000-60/120
CUTTING PLOTTER
OPERATION MANUAL
MANUAL NO. CE2060-UM-451
Operation Manual: 1
Cutter blade: 1 (CB09UA)
Water-based fiber-tip pen: 1
1 – 2
User Guide CD-ROM: 1
Roll media tray: 1
(CE2000-60 only)