GRAPHTEC CE2000-60 User Manual page 2

PREFACE
Thank you for choosing a Graphtec CE2000 series cutting plotter.
This cutting plotter employs a digital servo drive system to achieve high-speed and high-precision cutting
operations. Besides cutting marking film and other media, it can also be used as a pen plotter.
To ensure good cutting quality and optimum productivity, be sure to read this User's Manual thoroughly
before use.
•
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, without the prior written permission of Graphtec Corporation.
•
The specifications and other information in this manual are subject to change without notice.
•
While every effort has been made to provide complete and accurate information, please contact your
sales representative or nearest Graphtec vendor if you find any unclear or mistaken information or
wish to make other comments or suggestions.
•
Notwithstanding the stipulation in the preceding paragraph, Graphtec Corporation assumes no liability
for damages resulting from either the use of the information contained herein or from use of the
product.
All names of companies, brands, logotypes, and products appearing in this manual are the trademarks
or registered trademarks of their respective companies.