GRAPHTEC CE2000-60 User Manual page 7

Safety Precautions (Continued)
Do not attempt to lubricate the cutting plotter's mechanisms.
• Such action may cause it to break down.
Do not clean the cutting plotter using a volatile solvent such
as thinner or benzine.
• Such action may impair its performance.
During cutting or plotting, provide enough space around the
cutting plotter so that the medium will not hit any objects in
its vicinity.
• Such contact may cause cutting or plotting to go out of
alignment.
When using indoor lighting such as a fluorescent lamp or an
electrical lamp, provide a distance of at least one meter between
the cutting plotter and the light source.
• Closer proximity of such a light source may cause the sensor
to malfunction and prevent proper size detection of the media.
When using the cutter, be sure not to extend its blade more
than necessary.
• An overly extended blade will damage the cutting mat and
adversely affect the cutting quality.
When manually moving the pen carriage in order to load a
medium or other reasons, move the pen carriage slowly.
• Moving it quickly may cause damage to the cutting plotter.
CAUTION
Contact prohibited
v
Prohibited
Prohibited