Volkswagen 2004 Golf Workshop Manual page 76

Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
Tighten hexagon bolts -arrows- for upper shock absorber mount‐
ing.
– Install plenum chamber cover.
– Install wiper arms ⇒ Rep. Gr. 92 ; Wiper system; Removing
and installing wiper arms .
– Bolt engine and gearbox jack -V.A.G 1383 A- with support
-T10149- to wheel hub using a wheel bolt.
WARNING
♦ Do not lift or lower the vehicle while the engine and gear‐
box jack -V.A.G 1383 A- is under the vehicle. The vehicle
could slip off the lifting platform.
♦ Do not leave the engine and gearbox jack -V.A.G 1383 A-
under the vehicle for longer than necessary.
– Position suspension strut on wheel bearing housing.
– Remove wire from wheel bearing housing.
– Using gearbox jack, carefully raise wheel bearing housing until
bolt securing suspension strut to wheel bearing housing can
be inserted.
– Press brake disc towards suspension strut by hand while lift‐
ing.
Otherwise the shock absorber tube can cant in the bore of the
wheel bearing housing.
– Remove spreader -3424- .
– Tighten threaded connection between wheel bearing housing
and suspension strut -arrow-
WARNING
♦ Do not leave the engine and gearbox jack -V.A.G 1383 A-
under the vehicle for longer than necessary.
68
Rep. Gr.40 - Front suspension