Volkswagen 2004 Golf Workshop Manual page 255

Vehicles with retainer for handbrake cable
– Attach retainer -1- by pushing in inner pin of rivet -arrow-.
Continuation for all vehicles
After installation, toe setting must be checked on wheel alignment
unit.
– Install coil spring ⇒ page 173
– Install wheel and tighten
– Perform wheel alignment
Specified torques
Component
Trailing arm to wheel bearing housing
♦ Use new bolts
Trailing arm to mounting bracket
♦ Use new bolt
Mounting bracket to body
♦ Use new bolts
Coupling rod to trailing arm.
♦ Use new nut
Handbrake cable to trailing arm
⇒ Brake systems; Rep. Gr. 46
13. Assembly overview - wheel bearing housing, trailing link (four-wheel drive, subframe made from aluminium and wheel bearing housing
.
⇒ page 288 .
⇒ page 305 .
Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
Specified torque
90 Nm + 90°
90 Nm + 90°
50 Nm +45°
45 Nm
made from cast steel)
247