Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
– Remove bolts -11- and -16- for anti-roll bar.
– Fix position of subframe
– Separate connector for extended service intervals on oil sump.
– Position
engine and gearbox jack -V.A.G 1383 A- under subframe.
– Place, for example, a wooden block -1- between engine and
gearbox jack -V.A.G 1383 A- and subframe.
– Remove bolts -4- and -5- and lower subframe slightly. In the
process, observe electrical wiring.
394
Rep. Gr.48 - Steering
⇒ page 16
.