Volkswagen 2004 Golf Workshop Manual page 264

Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
♦ Torque wrench -V.A.G 1410-
Removing
– Remove coil spring
– Remove drive shaft
– Remove brake carrier with brake caliper and tie to body with
wire ⇒ Rep. Gr. 46 .
Note
Do not suspend the brake caliper from the brake hose.
– Remove bolt for brake disc and remove brake disc.
– Remove bolts -2-.
– Pull wheel hub/wheel bearing unit out from wheel bearing
housing.
Installing
Carry out installation in the reverse sequence, noting the follow‐
ing:
– Use a new hexagon bolt and tighten
Specified torques
Component
Wheel hub with wheel bearing to wheel bearing housing
♦ Use new bolt
Brake disc to wheel bearing housing.
256
Rep. Gr.42 - Rear suspension
⇒ page 257 .
⇒ page 276 .
⇒ page 274 .
70 Nm + 90° further
Specified torque
4 Nm