Volkswagen 2004 Golf Workshop Manual page 53

Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
– Loosen bolt -10-.
– Fix position of subframe ⇒ page 16 .
– Remove coupling rods from anti-roll bar.
– Now unscrew bolts for:
♦ steering box -3- and -6-
♦ and subframe -4- and -5-.
– Lower subframe until bolt -10- can be unscrewed completely.
– Unscrew bolts -1- and remove suspension link with bracket.
Installing
– Insert suspension link with mounting bracket into subframe.
– Start bolts -7- and -10-, but do not yet tighten.
– Raise subframe back to its original position.
– Now replace locating pins -T10096- at positions -1-, -8-, -9-
and -18- with new bolts and tighten them to specified torque.
– Screw in bolts -4- and -5- and tighten.
– Tighten bolts -7-.
45
3. Subframe, anti-roll bar, suspension link