Volkswagen 2004 Golf Workshop Manual page 120

Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
Pressing on inner constant velocity joint
– Press joint on to stop.
– Install retaining ring.
– Coat sealing surface of cover with -D 454 300 A2- .
– Apply continuous bead of sealant (2...3 mm Ø) past inner edge
of holes -arrow- to clean surface of cover.
– Using bolts -arrows-, align new cover in relation to bolt holes.
The alignment must be very accurate, because no further align‐
ment is possible once the part has been hammered on.
– Drive on cover using a plastic hammer.
– Wipe off surplus sealant.
112
Rep. Gr.40 - Front suspension