Removing And Installing Strut - Volkswagen 2004 Golf Workshop Manual

Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
– Insert mounting bracket and screw in bolts -1- and -2-.
– Install bolts -arrows B-.
Note
Bolts -arrows B- are screwed in from cross member.
– Screw in bolt -arrow A-.
– Insert connector -1- into support in mounting bracket and push
to stop opposite -direction of arrow-.
– Install bolts -arrows- under bracket.
– Install steering column
– Install dash panel insert ⇒ Electrical system; Rep. Gr. 90 ;
Dash panel insert; Removing and installing dash panel insert .
– Perform basic settings for steering angle sensor -G85- using
vehicle diagnosis, testing and information system -VAS
5051B- .
Specified torques
Component
Mounting bracket to body
Strut to mounting bracket
Steering column to mounting bracket
4.7

Removing and installing strut

Special tools and workshop equipment required
348
Rep. Gr.48 - Steering
⇒ page 354 .
Specified torque
20 Nm
20 Nm
20 Nm