Volkswagen 2004 Golf Workshop Manual page 134

Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
– Fit triple roller spider onto shaft and press on to stop.
– Ensure that pressure does not exceed 3.0 t.
– If necessary, coat splines of drive shaft and triple roller spider
with lubricant paste G 052 142 A2.
– Insert retaining ring, ensuring that it is seated correctly.
– Press 70 grammes of drive shaft grease from repair set into
triple roller joint.
– Slide joint body over rollers and hold.
– Press 60 g of drive shaft grease from repair kit into rear of triple
roller joint.
– Install joint boot.
– Tighten both hose clips with hose clip pliers -V.A.G 1275- .
126
Rep. Gr.40 - Front suspension