Volkswagen 2004 Golf Workshop Manual page 201

– Support propshaft on tunnel support using a wooden block.
– Push rear propshaft tube towards gearbox as far as possible.
– Now secure vehicle to lifting platform on both sides using ten‐
sioning straps -T10038-.
WARNING
If the vehicle is not strapped down, there is a great danger that
the vehicle will slip off the lifting platform!
– Position engine and gearbox jack -V.A.G 1383 A- under sub‐
frame using universal gearbox mounting -V.A.G 1359/2- and
secure with tensioning strap.
– Unscrew one hexagon bolt -1- or -2- on each side.
Note
Only the left side of vehicle is shown to improve clarity.
Running gear, axles, steering - Edition 08.2009
9. Assembly overview - subframe made from aluminium, final drive (four-wheel drive)
Golf 2004 ➤ , Golf Plus 2005 ➤
193