Volkswagen 2004 Golf Workshop Manual page 400

Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
– Remove bolt -1- for universal joint and pull universal joint -2-
off steering box.
– Remove front wheels.
– Loosen nut on track rod ball joint but do not remove complete‐
ly.
Caution
Leave nut screwed a few turns onto pin to protect thread.
– Press track rod ball joint off wheel bearing housing using ball
joint puller -3287A- and remove nut now.
– Remove lower noise insulation ⇒ Rep. Gr. 50 ; Assembly
overview - noise insulation .
– Remove coupling rod from anti-roll bar.
– Remove nuts -arrows-.
– Disconnect pendulum support from gearbox by removing bolts
-14-.
392
Rep. Gr.48 - Steering