Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
– Tighten bolt -arrow-.
Note
Make sure that the plate between wheel bearing housing and
shock absorber is also installed.
– Install coil spring
⇒ page 257
– Install wheel housing liner ⇒ General body repairs, exterior;
Rep. Gr. 66 .
– Install wheel and tighten
Specified torques
Component
Shock absorber to body
♦ Use new bolts!
Shock absorber to wheel bearing housing
16.3
Repairing shock absorber
⇒ page 260
264
Rep. Gr.42 - Rear suspension
.
⇒ page 288
.
Specified torque
50 Nm + 45° further
180 Nm