Volkswagen 2004 Golf Workshop Manual page 35

– Secure subframe to engine and gearbox jack -V.A.G 1383 A-
with the appropriate strap.
Installing
Install in reverse order.
– Install noise insulation and tighten, specified torque ⇒ General
body repairs, exterior; Rep. Gr. 50 ; Assembly overview -
noise insulation .
Specified torques
Component
Subframe to body
♦ Use new bolts
Anti-roll bar to coupling rod
♦ Use new nut
♦ Counterhold on multi-point socket of joint pin
Track rod ball joint to wheel bearing housing
♦ Use new nut
Swivel joint to cast steel suspension link
♦ Use new nuts
Swivel joint to sheet steel or forged aluminium suspension
link
♦ Use new nuts
Universal joint to steering box
♦ Use new bolt
Exhaust system bracket to subframe
⇒ Engine; Rep. Gr. 26
Specified torques for pendulum support to gearbox
Caution
From model year 08, HeliCoil inserts are installed in the pen‐
dulum support connection in the 02Q gearboxes. Identification
⇒ Rep. Gr. 34 .
Use a bolt with hardness class 10.9 for this and all other gear‐
boxes.
If there is no HeliCoil insert in the 02Q gearbox, use bolts with
the strength class 8.8 and the corresponding torque setting.
Bolt
M10 x 35 strength class 8.8
♦ Use new bolt
M10 x 35 strength class 10.9
♦ Use new bolt
Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
Specified torque
Specified torque
40 Nm + 90° further
50 Nm + 90° further
3. Subframe, anti-roll bar, suspension link
70 Nm + 90°
65 Nm
20 Nm + 90°
60 Nm
100 Nm
30 Nm
27