Volkswagen 2004 Golf Workshop Manual page 37

– Press out both bonded rubber bushes at the same time as
illustrated.
Note
Flattened side of thrust piece -3372/1- must face towards in‐
♦
sert -A- of traverse -T10244- because otherwise insert may be
damaged.
Tube -T10244/3- has a larger and a smaller internal diameter.
♦
The subframe must lie against the large internal diameter of
tube -T10244/3-.
Pressing in bonded rubber bush
– Bolt bonded rubber bushes together using original bolt, mak‐
ing sure that both notches -arrows- line up precisely.
– Insert assembled bonded rubber bushes with bolt head down‐
wards into tube -T10214/2- .
1 - Thrust piece -T10214/3-
2 - Bonded rubber bush
3 - Tube -T10214/2-
4 - Tube -T10214/1-
5 - Thrust plate -VW 401-
6 - Thrust plate -VW 402-
Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
3. Subframe, anti-roll bar, suspension link
29