Assembly Overview - Wheel Bearing - Volkswagen 2004 Golf Workshop Manual

Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
4

Assembly overview - wheel bearing

1 - Wheel bearing housing (3-
point mounting) - FS III brakes
❑ Removing and installing
⇒ page 60
❑ With integrated brake
carrier.
❑ If wheel bearing housing
is renewed, wheels
must be aligned
⇒ page 305 .
❑ Allocation ⇒ Electronic
parts catalogue "ETKA"
2 - Wheel hub with wheel bear‐
ing (3-point mounting) - FS III
brakes
❑ Removing and installing
⇒ page 57
❑ The ABS sensor ring is
installed in the wheel
hub
❑ Allocation ⇒ Electronic
parts catalogue "ETKA"
3 - Suspension strut
4 - Multi-point socket head bolt
❑ Tip of bolt must point in
direction of travel
5 - Front left speed sensor -
G47- / front right speed sensor
-G45-
❑ Before inserting speed
sensor, clean inner sur‐
face of fitting hole and
coat with lubricating
paste -G 000 650- .
6 - Hexagon socket bolt
❑ 8 Nm
7 - Track rod ball joint
8 - Splash plate
9 - Bolt
❑ 10 Nm
10 - Nut
❑ M12 x 1.5
❑ 20 Nm + 90° further
❑ Self-locking
❑ Always renew after removing
11 - Wheel bearing housing (4-point mounting) - FS III brakes
❑ Removing and installing
❑ With integrated brake carrier.
❑ If wheel bearing housing is renewed, wheels must be aligned
❑ Allocation ⇒ Electronic parts catalogue "ETKA"
56
Rep. Gr.40 - Front suspension
⇒ page 60
⇒ page 305 .