Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
Exchanging 1st generation steering
box for 2nd generation steering box,
There are no new 1st generation steering boxes available as
parts for renewing 1st generation steering boxes.
Therefore, 2nd generation steering boxes must be fitted.
For some vehicles, a few other parts in addition to the steering
box must be exchanged. Which vehicles are affected and the
procedure to be followed are described below.
The parts in the following list must be renewed when a 1st gen‐
eration steering box is exchanged:
♦ The wiring harness generally must be exchanged.
♦ Subframes from Part No. 1K0.199.369 through and including
1K0.199.369.E. must be exchanged. Subframes from Part No.
1K0.199.369.F need not be exchanged. To order parts via the
⇒ Electronic parts catalogue "ETKA" , the assembly
1K0.199.313 must be ordered with the respective index.
♦ For left-hand-drive vehicles, the right bracket from Part No.
1K0.199.296 through and including 1K0.199.296.C must be
exchanged. Brackets from Part No. 1K0.199.296.D need not
♦ For right-hand-drive vehicles, the left bracket from Part No.
1K0.199.295 through and including 1K0.199.295.C must be
exchanged. Brackets from Part No. 1K0.199.295.D need not
The allocation of the respective parts can be determined in the ⇒
Electronic parts catalogue "ETKA" .
Rep. Gr.48 - Steering