General Programming
[812] DISA DTMF Repeat
Description
Selects whether the system transmits DTMF (Dual Tone Multi-Frequency) signals directly to
the central office (CO) or if the system repeats the DTMF signals to CO in order to adjust gain.
This can be done for an outside-to-outside line call via the Direct Inward System Access
(DISA) feature during dialing and / or during an established call.
This program is available for the KX-TD1232 only.
Selection
• Dial (during dialing) / Call (during an established call)
• Mode: Repeat / Through
Default
Dial and Call — Repeat
Programming
1.
Enter 812.
Display: 812 DISA DTMF
2.
Press NEXT to program the mode during dialing.
To program the mode during an established call, press NEXT again.
Display example: Dial:Repeat
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press NEXT to program the mode during an established call.
Display example: Call:Repeat
6.
Keep pressing SELECT until the desired selection is displayed.
7.
Press STORE.
8.
Press END.
Conditions
None
Features Guide References
Direct Inward System Access (DISA)
352
Programming Guide