[502] Extension-to-Outside Line Call Duration Limit
Description
This program allows you to restrict the duration of outside calls on a Class of Service (COS)
basis.
Selection
• COS number:
1 through 8,
• Disable (no limit) / Enable (limit)
Default
All COS — Disable
Programming
1.
Enter 502.
Display: 502 EXT-CO TIMER
2.
Press NEXT.
3.
Display: COS NO?
4.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
5.
Keep pressing SELECT until the desired selection is displayed.
6.
Press STORE.
7.
To program another COS, press NEXT or PREV, or SELECT and the desired COS
number.
8.
Repeat steps 4 through 6.
9.
Press END.
Conditions
• An outside call originated or answered by the programmed extension user is disconnected
when the time specified in program [205] Extension-to-Outside Line Call Duration Time
expires.
• Extensions in limited classes cannot establish an outside-to-outside call, that is, cannot
transfer / forward an outside call to another CO line or perform an Unattended Conference.
• To assign all COS to one selection, press the
the contents programmed for COS 1.
• Program [601] Class of Service is used to assign a Class of Service to each extension.
Programming Guide
( =all COS)
key in step 3. In this case, the display shows
General Programming
255