4.3
Station Features and Operation
Pulse to Tone Conversion
You can change the dialing mode from Pulse to Tone temporarily to access services such
as computer telephone services, Voice Mail, etc., that require a tone.
PT and SLT
phone no. (Pulse mode)
Dial the phone number
(Pulse mode).
Conditions
• You cannot change the dialing mode from Tone to Pulse.
Programming References
• System Programming - Installation Manual, Section 4
4.4.1 Line - Trunk Line
Feature References
Dial Type Selection (
Dial
#.
— Dial Type
see Features Guide)
desired no. (Tone mode)
Dial the desired number
(Tone mode).
Station Features and Operation
P
4-171