Canon imageRUNNER 2530 Service Manual page 297

3) Remove the Lower rear cover.
•
1 Screw
•
2 Hooks
x2
Hook
4) Remove the heater connector plate at rear side of the Cassette Module. (The removed heater connector plate will not be used.)
•
1 Screw
MEMO:
When performing
this procedure, it
is not necessary to
remove the main
body. However, the
figure shows the
picture without the
main body to
show easily.
9
Installation > Cassette Heater Unit 37 > Installation Procedure > In case of Options(Cassette Module)
Hook
F-9-131
9 Installation > Cassette Heater Unit 37 > Installation Procedure > In case of Options(Cassette Module)
F-9-132
9-61
9-61