Installation Procedure - Canon imageRUNNER 2530 Service Manual

Installation Procedure

1) Remove the rear cover (right).
•
Screws (3 pcs.)
•
Claws (2 pcs.)
x3
x2
Claws
3) Press the SW3 on the controller PCB and confirm LED10 has gone OFF. (This action is to cut the secondary power OFF.)
9
Installation > System Upgrade RAM-C1 Installation Procedure > Installation Procedure
2) Remove the controller plate.
•
Screws (3 pcs.)
x3
F-9-84 F-9-84
9 Installation > System Upgrade RAM-C1 Installation Procedure > Installation Procedure
F-9-85 F-9-85
F-9-86 F-9-86
9-39
9-39