Erasing A License - Canon imageRUNNER 2530 Service Manual

#SEND
001 1
OK
(6) Press 2 using the numeric key and press the OK key.
The 24 digits of license transfer numbers are displayed, so you take the memo.
Because it cannot maintain the number displaying with the thing of this place limit.
If you do not take the memo, the indication contents are not held when you do OFF of
the main power, it is impossible for license transfer.
Even if you push the reset key and clear the indication, the indication is never display
again.
License transfer example:
0743 5306 1326
8106 5575 0721
OK
(7) Turn OFF/ON the power of the main unit.
For Reference:
When a license option is displayed in Procedure (4), 001 1 is displayed. The last "1" shows
that the license is validated by license authentication.
After the license is transferred, the last number is changed to "2".
When the option is standard, the last number shows "3" which means disable for license
8
Service Mode > Details of Service Mode > #LMS > Erasing a License
Press '2' from the numeric
keypad and press 'OK'.
F-8-3 F-8-3
F-8-4 F-8-4
8 Service Mode > Details of Service Mode > #LMS > Erasing a License
transfer.
Details about the last number:
1: The function is validated.
2: The function is invalidated, or the license is transferred.
3: The function is invalidated, or the license does not exist.
(8) When you contact the contact section of the sales company and report a function
invalidation certificate key required for license transfer, the serial number of the transfer
origination device, and the serial number of the transfer destination device, a new license
key that can be registered to the transfer destination device is issued.
(9) Register the new license key to the transfer destination device and make sure that the
function is validated.

Erasing a License

Erasing a License
When you invalidate a license option on a temporary basis or when you do not use it for a
long period of time, you can invalidate the function by erasing the license.
The license can be validated by registering the license number again.
Procedure to erase a license
You can erase a license by entering the service mode.
Operation Procedure:
(1) Enter the service mode and display the following service mode.
When you have entered the service mode, use the right and left arrow keys to display
items,and press the OK key to fix the setting.
(2) Display [#LMS].
(3) Press the OK key and display [#LMS ERASE].
(4) Display [SEND].
(5) Press the OK key.
(6) Turn OFF/ON the power of the main unit.
For Reference:
There is no function to display the license registration numbers in the main unit. Therefore,
when there is a possibility to restore the license after erasing it, make sure that a user has
written down the license registration number.
8-37
8-37