Installation Procedure - Canon imageRUNNER 2530 Service Manual

Installation Procedure

1) Turn the main power OFF and unplug the power cord from
the outlet.
2) Open the front cover.
F-9-166
4) Turn the lock lever as shown in the figureand remove the
waste toner container.
9
Installation > Drum Heater-C1 Installation Procedure > Installation Procedure
3) Push the button to open the right cover.
CAUTION:
To avoid any damage on the
drum unit, keep the right cover
open by 5 cm or more during
installation.
5) Remove 1 screw from the developing pressure lever.
The screw does not exist in some machine versions by destination.
6) Turn the developing pressure lever as shown in the figure and release
the developing unit.
x1
F-9-168
9 Installation > Drum Heater-C1 Installation Procedure > Installation Procedure
7) Slowly draw out the drum unit by half as shown while gripping the
lever beneath the drum unit handle.
F-9-169
9-74
F-9-167
F-9-170
9-74