Canon imageRUNNER 2530 Service Manual page 317

25) Fit the harness on the harness guide of the drum heater unit as shown.
27) Joint the connector of the drum heater harness to J1104 on the heater PCB.
x1
9
Installation > Drum Heater-C1 Installation Procedure > Installation Procedure
26) Fix the drum heater harness in the 2 wire saddles and 1 edge saddle.
F-9-191
F-9-193
9 Installation > Drum Heater-C1 Installation Procedure > Installation Procedure
x3
9-81
F-9-192
9-81