Canon imageRUNNER 2530 Service Manual page 294

4)Install the 1 supplied wire saddle (small), joint 1 connector and install the heater (right) with 1 screw.
x1
x1
x1
9
Installation > Reader Heater Unit-H1 Installation Procedure > Installation Procedure > Installation of Reader Heater (for iR2545/2535 series)
5)Restore the following parts:
Platen glass
Glass retainer (right)
Rear lower cover
Connector cover
Left rear cover
Left rear blindfold
cover
Rear cover (left)
Rear cover (right)
F-9-128 F-9-128
9 Installation > Reader Heater Unit-H1 Installation Procedure > Installation Procedure > Installation of Reader Heater (for iR2545/2535 series)
6)Turn the switch of the heater power ON.
2 screws
1 screw
1 screw
3 screws
1 screw
3 screws
2 screws
9-58
9-58