Installation Procedure
1) Remove the rear cover (right).
•
Screws (3 pcs.)
•
Claws (2 pcs.)
x3
x2
Claws
3) Remove the left rear blindfold cover.
•
Screw (1 pc.)
9
Installation > Cst Heater Kit-J1 Installation Procedure > Installation Procedure
2) Cut off the blindfold cover of the rear cover (right) by a side cutter as shown.
CAUTION:
Finish the surface of the cut part of the rear cover (right) to remove burrs.
F-9-92
F-9-92
4) Remove the left rear cover.
•
Screws (3 pcs.)
F-9-94
F-9-94
9
Installation > Cst Heater Kit-J1 Installation Procedure > Installation Procedure
x3
9-45
F-9-93
F-9-93
F-9-95
F-9-95
9-45