Installation Procedure
1) Remove the Power Supply Retainer and Power plug.
•
1 Screw
3) Remove the SD Card Cover and the Left Rear Cover, and cut off the part of the Left Rear Cover indicated in the figure below with nippers.
•
4 Screws
CAUTION:
x4
When cutting
off with
nippers, be
sure to cut it
off fully.
9
Installation > Serial Interface Kit-J2 Installation Procedure > Installation Procedure
2) Remove the Rear cover (right).
•
3 Screws
•
2 Claws
x3
x2
Claws
F-9-67
F-9-67
F-9-69
F-9-69
9
Installation > Serial Interface Kit-J2 Installation Procedure > Installation Procedure
31
F-9-68
F-9-68
F-9-70
F-9-70
31