Canon imageRUNNER 2530 Service Manual page 246

8) Unpack the new drum unit, remove packaging materials, and then pull two orange rings to remove
the protective cover.
CAUTION:
•
Do not touch the drum surface
while at work.
•
Do not expose the drum
surface to light for a long
period of time.
10) Turn the lever as shown below to lock the drum unit.
11) Secure the developer pressure lever with the screw.
x1
9
Installation > Making Pre-Checks > Selecting the Site of Installation
F-9-16 F-9-16
12) Place the collected toner container in the machine.
13) Lower the lock lever to lock the collected toner container.
F-9-18 F-9-18
9 Installation > Making Pre-Checks > Selecting the Site of Installation
9) While holding the drum unit at the handle and the position shown below, insert it into the body
slowly until it stops.
CAUTION:
When inserting the drum unit,
check that the drum unit fits
precisely with the rail of the
host machine.
14) Close the front cover.
15) Close the right cover.
F-9-19 F-9-19
9-10
F-9-17 F-9-17
9-10