Installation Procedure; In Case Of Ir 2545/2535 Series; In Case Of Ir 2530/2525/2520 Series - Canon imageRUNNER 2530 Service Manual

Installation Procedure

In case of iR 2545/2535 Series

1) Remove the 2 Face Seals. (The removed Face Seals are no
longer used.)

In case of iR 2530/2525/2520 Series

1) Remove the 2 Face Seals. (The removed Face Seals are no
longer used.)
9
Installation > Document Tray-J1 Installation Procedure > Installation Procedure > In case of iR 2530/2525/2520 Series
2) Tighten the 2 stepped screws (M4X10.8) to the Reader Right
Cover.
x2
F-9-33 F-9-33
2) Tighten the 2 stepped screws (RS tightening; M4X18) to the
Reader Right Cover.
x2
F-9-36 F-9-36
9 Installation > Document Tray-J1 Installation Procedure > Installation Procedure > In case of iR 2530/2525/2520 Series
3) Hook the cut-off of the Document Tray (Reinforcing Plate) to the
s t e p p e d s c r e w s t i g h t e n e d i n t h e I n s t a l l a t i o n > D o c u m e n t T r a y - J 1 I n s t a l l a t i o n P r o c e d u r e > I n s t a l l a t i o n P r o c e d u r e > I n c a s e o f i R 2 5 3 0 / 2 5 2 5 / 2 5 2 0 S e r i e s s t e p 2 ) .
Stepped Screw
Cut-off
F-9-34 F-9-34
3) Hook the cut-off of the Document Tray (Reinforcing Plate) to the
s t e p p e d s c r e w s t i g h t e n e d i n t h e I n s t a l l a t i o n > D o c u m e n t T r a y - J 1 I n s t a l l a t i o n P r o c e d u r e > I n s t a l l a t i o n P r o c e d u r e > I n c a s e o f i R 2 5 3 0 / 2 5 2 5 / 2 5 2 0 S e r i e s s t e p 2 ) .
Stepped Screw
F-9-37 F-9-37
9-19
Stepped Screw
F-9-35 F-9-35
Stepped Screw
Cut-off
F-9-38 F-9-38
9-19